Back to Blog
How-to Guides 2026-11-11 Portable Power Stations, Solar Generators 0 views

6mm Extension Cable: Extend Your Power Station Reach

6mm Extension Cable: Extend Your Power Station Reach

Learn how a 6ft 6mm extension cable extends the reach of your Light-A-Life 350 or Maintainer 10, and how to set it up for flexible power station placement.

Why a 6mm extension cable helps

When your power station needs to sit a little farther from your gear, a short extension cable can make the difference between an awkward setup and a comfortable one. The 6mm Output 6ft Extension Cable is designed to extend the reach from the Light-A-Life 350 Light to a power bank or station, or to extend the reach of the Maintainer 10. Instead of moving the whole power source, you simply add 6 feet of cable between the device and the station.

This is especially useful when you want to keep the power station in a dry, shaded spot while positioning the light or maintainer where it's needed most. The extra length gives you more freedom to arrange your campsite, workshop, or outdoor space without being tied to the station's exact location.

What the 6ft extension cable offers

  • 6mm Output 6ft Extension Cable: Input: 6 mm, Output: 6 mm, Cord Length: 6 ft, Gauge: 18 The 6mm connectors match the ports on compatible devices, and the 18-gauge wire is suited for low-power connections like lights and maintainers.
    6mm Output 6ft Extension Cable
    6mm Output 6ft Extension Cable
  • 6mm Output 6ft Extension Cable: Used with: Light-a-Life 350, Maintainer 10 This cable is specifically designed for these two devices, so you know the connection is intended for your gear.
  • 6mm Output 6ft Extension Cable: Product SKU: 90808A Having the SKU helps you verify you're ordering the correct cable for your setup.

How to set up the 6mm extension cable

The setup is straightforward, but following these steps helps ensure a secure connection and reliable performance.

  1. Check compatibility: Confirm that your device is a Light-a-Life 350 or Maintainer 10, and that your power source has a 6mm output port. The cable uses 6mm connectors on both ends.
  2. Connect the cable to the power source: Plug the cable's input end into the 6mm output port on your power bank or station. Make sure it's fully seated to avoid intermittent connections.
  3. Connect your device: Attach the output end of the cable to your Light-a-Life 350 or Maintainer 10. Again, ensure a snug fit.
  4. Position your gear: With the 6-foot length, you can now place the power source in a convenient spot and run the cable to where the light or maintainer is needed. Avoid placing the cable where it can be tripped over or pinched.

When the 6ft extension is most useful

The 6-foot length is a middle ground: long enough to give you real placement flexibility, but not so long that it becomes a trip hazard or adds unnecessary bulk. It's ideal for situations where your power station is tucked under a table or in a corner, but you need the light or maintainer several feet away.

For example, you might use the Light-a-Life 350 to illuminate a cooking area while the power bank stays dry under a canopy. Or you could run the cable to a Maintainer 10 that's working on a battery that's not right next to the station. The extension gives you that extra reach without having to relocate your power source.

What to keep in mind

This cable is designed for the Light-a-Life 350 and Maintainer 10. If you have other devices with 6mm ports, the cable may work, but compatibility is not confirmed by the supplied information. Stick with the intended devices to avoid surprises.

The cable is 18-gauge, which is fine for the low-power draw of a light or maintainer. It's not meant for high-current applications like powering a large appliance. Keep the cable away from sharp edges and heat sources, and store it loosely coiled when not in use to avoid kinks.

Related Articles

Customer Service
Home
Products
Cart
Profile