What the Yeti MPPT Module Does
The Yeti Lithium MPPT Solar Charging Optimization Module is an external add-on that actively monitors and optimizes the energy source from your solar panels to maximize power input into compatible Yeti power stations. The result can be up to 40% faster charge times, especially when using solar panels. It's designed for Yeti X and Yeti Lithium power stations with a capacity of 1000W and up.
Compatibility Check First
Before buying, confirm your power station model. The module works with Yeti 1000 Lithium, Yeti 1400 Lithium, and is pre-installed on the Yeti 3000 Lithium. It is also compatible with Yeti X power stations 1000W and up, but note: all Yeti X power stations already have integrated MPPT charging. For the X line, this module is recommended only for adding extra solar input capability, not as a replacement for the built-in MPPT.
Critical: The module is NOT compatible with X line power supplies—only with Yeti LI power supplies. Also, the Yeti Link Expansion Module and this MPPT module use the same expansion bay, so they cannot be used at the same time.
Yeti MPPT Module at a Glance
- Yeti Lithium MPPT Solar Charging Optimization Module (OPEN BOX): Compatible with Yeti X and Yeti Lithium Power Stations 1000W and up. Ensures you buy the right module for your power station.

Yeti Lithium MPPT Solar Charging Optimization Module (OPEN BOX) - Yeti Lithium MPPT Solar Charging Optimization Module (OPEN BOX): Up to 40% faster charge times, especially from solar panels. Quantifies the real-world benefit for solar charging.
- Yeti Lithium MPPT Solar Charging Optimization Module (OPEN BOX): Input ports: 8mm Charging Port (15-22V) and High Power Charging Port (15-22V). Do not exceed 22V input under standard use. Do not exceed 150W (10A) per port. Critical voltage and wattage limits to avoid damaging the module or power station.
- Yeti Lithium MPPT Solar Charging Optimization Module (OPEN BOX): Dimensions: 10.25 x 3.3 x 1.5 in. (26 x 8.4 x 3.8 cm); Weight: 1.3 lbs (583 g). Helps plan installation space and portability.
- Yeti Lithium MPPT Solar Charging Optimization Module (OPEN BOX): Expansion Module Connector (output): 25A MPPT charge controller. Output spec for connecting to the power station expansion bay.
Installation Overview
The module installs into the expansion bay of your Yeti power station. Before starting, ensure the power station is off and disconnected from any power source. Slide the module into the bay until it clicks securely. The module communicates with the power station through the expansion connector, so no separate cables are needed for the connection.
If you already have a Yeti Link Expansion Module installed, you will need to remove it first because both modules cannot occupy the same bay at the same time. After installation, connect your solar panel to the module's input ports (8mm or High Power Charging Port) respecting the 15-22V input range and 150W (10A) per port limit.
Key Trade-offs to Consider
Because this is an open-box product, it may look and feel brand new, but packaging may no longer be up to original standards. The unit could be an unused return or demo model without original packaging. There are no returns or exchanges, and the warranty is 6 months (shorter than the standard 12-month warranty listed for the module itself). Additional promos or discounts cannot be applied to the already reduced price.
If you need both expansion battery capacity (via the Yeti Link) and MPPT optimization, you will have to choose one or the other since they share the same bay. For Yeti X users, the integrated MPPT is already capable; this module only adds extra solar input capacity, so weigh whether your solar array exceeds the built-in input limits.


