Which Yeti models does the 60W power supply charge?
- Which Yeti models does the 60W power supply charge?
- The supplied record lists it for the Goal Zero Yeti 200X and Yeti 500X. It lets you charge either station from an AC wall outlet. The same record says it cannot be used for Yeti Lithium or Yeti Lead Acid Power Stations, so check your model name before ordering.
- Can I use it as a replacement for a lost or damaged supply?
- Yes. The record describes it as usable as a replacement power supply, and it is also included with a Yeti purchase. If you already own a 200X or 500X and the original cord is missing, this is the part the record points to.
- What does the 8.0mm output connect to?
- The output is an 8.0mm barrel connector rated 19V at 3.0A, or 57W. That is the end that goes into the Yeti. The record does not list other devices with an 8.0mm input, so treat it as a Yeti charging cord rather than a universal adapter.
The connection details that decide fit
- Yeti X 60W Power Supply: Input: AC Wall Plug 100-240V - 50/60Hz 1.5A; Output: 8.0mm 19V - 3.0A, 57W The wall side accepts standard international mains voltages, and the 8.0mm output is the plug that must match your Yeti's charging input.

Yeti X 60W Power Supply - Yeti X 60W Power Supply: Used With: Goal Zero Yeti 200X/ 500X This is the compatibility line to check against the label on your power station before you buy.
- Yeti X 60W Power Supply: NOTE: Can not be used for Yeti Lithium or Yeti Lead Acid Power Stations. Owners of older or larger Yeti stations should not assume this cord works just because the plug looks similar.
Setup and everyday use questions
- How do I set up the 60W power supply?
- Plug the AC wall plug into a mains outlet, then connect the 8.0mm output to the charging input on the Yeti 200X or 500X. The record does not include a charging time, indicator behavior, or step-by-step sequence beyond that, so follow the instructions that came with your power station for the charging procedure itself.
- How long is the cable, and does that matter?
- The record gives the cable length as 10' 5". That is enough to reach from a wall outlet to a station placed on the floor or a shelf nearby. The 16AWG gauge is also listed, which is the wire thickness used in the cord.
- What runs on the Yeti X 60W power supply?
- Nothing runs directly from this supply. It is a charging cord: it moves power from a wall outlet into a Yeti 200X or 500X, and the Yeti then runs your devices. What you can power depends on the station, not on this cord.
- Can I take it traveling?
- The input accepts 100-240V at 50/60Hz, which covers common mains voltages abroad. You would still need the right physical plug adapter for the outlet shape, and the record does not supply one. The cord itself measures 4.01 x 1.85 x 1.25 in (10.19 x 4.67 x 3.18 cm) at the adapter body.
- Is this the same as the higher-wattage Yeti X supplies?
- No. This unit outputs 57W and is listed only for the 200X and 500X. Higher-wattage Yeti X supplies are separate products, and the record here gives no basis for using this one on a different station.
What the record does not confirm
The supplied information does not state a charge time for the 200X or 500X with this supply, nor does it describe charging indicators or a required outlet type beyond the voltage and frequency above. It also does not list any device other than the two Yeti models. If your station is not a 200X or 500X, the record gives no compatibility answer, so check the label on your unit rather than assuming.


