Back to Blog
Buying Guides 2026-11-20 Portable Power Stations, Solar Generators 0 views

Sherpa 50 Power Bank with Inverter: What Can It Run?

Sherpa 50 Power Bank with Inverter: What Can It Run?

Learn what the Sherpa 50 Power Bank with Inverter can power, its key specs, and real-world trade-offs for laptops, tablets, and small devices.

What the Sherpa 50 Power Bank Can and Can’t Power

The Sherpa 50 Power Bank with Inverter is a lightweight, airplane-ready portable power supply designed to keep smaller electronics charged on the go. It works well for smartphones, tablets, point-of-view cameras, headlamps, and some laptops—but it has clear limits.

One important limitation: the Sherpa 50 will not power a MacBook Pro. For larger laptops or higher-wattage devices, consider a larger power pack like the Sherpa 100 or a Yeti power station.

With a 50-watt hour lithium battery, USB and 12V outputs, and a detachable AC inverter (110V, 75W max), this pack can recharge a smartphone 3–4 times, a tablet 1–2 times, or a laptop once. It also runs a Light-a-Life LED for about 16 hours.

Sherpa 50 Key Specs That Determine Compatibility

  • Sherpa 50 Power Bank with Inverter: 50-watt hour lithium battery with USB and 12V outputs for phones, tablets and more. The 50Wh capacity limits runtime for high-drain devices. It's best for small electronics rather than power-hungry gear.
    Sherpa 50 Power Bank with Inverter
    Sherpa 50 Power Bank with Inverter
  • Sherpa 50 Power Bank with Inverter: AC inverter US (output): 110V, up to 0.7A (75W max), 60Hz, modified sine wave. The inverter can power most laptops and camera batteries, but not devices that require pure sine wave or draw more than 75W.
  • Sherpa 50 Power Bank with Inverter: USB port (output): 5V, up to 1.5A (7.5W max), regulated. Standard USB charging speed—fine for phones and small devices, but slower than modern fast-charging adapters.
  • Sherpa 50 Power Bank with Inverter: Power Pack Weight: 1.2 lbs (544 g), Inverter Weight: 0.35 lbs (159 g). Combined weight under 1.2 lbs (power pack) plus 0.35 lbs (inverter) makes it easy to carry in a backpack or carry-on without adding much bulk.

Realistic Charging Estimates

Based on the supplied information, the Sherpa 50 can provide approximately:

Smartphone: 3–4 full recharges

POV camera: 9 recharges

Headlamp: 8–16 recharges

Tablet: 1–2 full recharges

Laptop: 1 full recharge

Light-a-Life LED: 16 hours of continuous light

These estimates assume the device being charged is fully drained. Actual results vary by device model, battery condition, and usage during charging.

Three Ways to Charge the Sherpa 50

The Sherpa 50 can be recharged from wall, car, or solar panel. The method you choose affects how quickly it's ready to go again.

  1. Wall charging: Using the included AC wall charger (30W), the Sherpa 50 fully recharges in about 3 hours.
  2. Car charging: Plug into your vehicle's 12V adapter (30W) for a full recharge in about 2–3 hours.
  3. Solar charging: Connect a compatible Nomad solar panel (e.g., Nomad 13 or Nomad 20). Charge time depends on panel size and sunlight: about 8–16 hours with a Nomad 13, 6–12 hours with a Nomad 20.

Who Is the Sherpa 50 For?

The Sherpa 50 Power Bank with Inverter suits travelers, campers, and remote workers who need a compact power source for phones, tablets, cameras, and small laptops. Its airline-friendly size and weight (power pack 1.2 lbs, inverter 0.35 lbs) make it a practical everyday carry.

However, if you need to power a MacBook Pro, run multiple high-drain devices simultaneously, or require pure sine wave AC output, you'll want a larger power station such as the Sherpa 100 or a Yeti series unit. The Sherpa 50 is a capable companion for light to moderate charging needs, not a full-home backup.

Related Articles

Customer Service
Home
Products
Cart
Profile