What the Sherpa Laptop Charging Kit actually does
The Sherpa Laptop Charging Kit is a compact cable set that lets you charge a laptop directly from a Sherpa power bank. Instead of carrying your laptop’s bulky original charging cord, you use the kit’s 15-inch cord and swap in the interchangeable tip that matches your laptop’s power input. The kit supports Asus, Dell, HP, IBM, Lenovo, Panasonic, Sony, and Toshiba laptops with specific tip sizes listed below.
This guide walks through the physical setup, how to choose the right tip, and what to check before relying on the kit for remote work. Note that the kit’s input is a 7.4mm connector, so it is designed for Sherpa power banks that have a matching output port. The supplied information does not confirm compatibility with every Sherpa model, so verify your power bank’s output port before you buy.
Kit specs that determine fit
- Sherpa Laptop Charging Kit: Input: 7.4mm The kit’s input must match your Sherpa power bank’s output port. If your power bank has a different port size, the kit will not connect without an adapter (not included).

Sherpa Laptop Charging Kit - Sherpa Laptop Charging Kit: Cord Length: 15 inches A short cord keeps the setup tidy on a desk or café table, but it limits how far the laptop can sit from the power bank.
- Sherpa Laptop Charging Kit: Weight: 0.5 oz At half an ounce, the kit adds virtually no weight to a remote-work bag.
How to set up the kit for laptop charging
Follow these steps in order to avoid a loose connection or the wrong tip.
- Identify your laptop’s power input: Look at the round power port on your laptop or the label on its original charger. Note the brand and the tip size (e.g., 5.5, 7.4, 8, or 6). The kit’s compatible tip sizes are listed in the next section.
- Select the matching interchangeable tip: Choose the tip that corresponds to your laptop brand and size. The kit includes tips for Asus (5.5), Dell (7.4), HP (7.4), IBM (5.5 and 8), Lenovo (5.5 and 8), Panasonic (5.5), Sony (6), and Toshiba (5.5).
- Connect the tip to the kit’s cord: Push the tip firmly onto the 15-inch cord’s output end. It should seat without forcing.
- Plug the kit’s 7.4mm input into the Sherpa power bank: Use the power bank’s output port that accepts a 7.4mm connector. The supplied information does not list which Sherpa models have this port, so check your model’s specs.
- Connect the tip to your laptop and power on: Plug the tip into your laptop’s power input, then turn on the power bank. Your laptop should begin charging. If it does not, recheck the tip size and the power bank’s output.
Which tip size fits your laptop brand?
The kit includes multiple tips, but not every size for every brand. Use this table to find your brand and the tip size(s) the kit supports.
- Asus: Tip size 5.5
- Dell: Tip size 7.4
- HP: Tip size 7.4
- IBM: Tip sizes 5.5 and 8
- Lenovo: Tip sizes 5.5 and 8
- Panasonic: Tip size 5.5
- Sony: Tip size 6
- Toshiba: Tip size 5.5
What the kit does not tell you about charging speed
The supplied information lists no wattage, voltage, or amperage for the kit. That means you cannot use the kit’s specs alone to predict how fast your laptop will charge or whether it will charge while you use it. Charging speed will depend on your Sherpa power bank’s output and your laptop’s power requirements. For best results, check your power bank’s manual for its output rating and compare it to your laptop’s original charger. If the power bank’s output is lower, the laptop may charge slowly or only maintain its battery level while idle.
Also, the kit is not a USB-C cable. It uses interchangeable barrel-style tips, so it will not connect to USB-C ports on laptops or power banks. If your laptop charges via USB-C, this kit is not the right solution.
Remote-work charging checklist
Before you rely on the Sherpa Laptop Charging Kit for a work session away from an outlet, run through these checks.
- Confirm your Sherpa model has a 7.4mm output port: The kit’s input is 7.4mm. If your power bank’s output is a different size, the kit will not connect directly.
- Pack the correct tip for your laptop: The kit includes multiple tips, but it is easy to lose small parts. Store unused tips in a small pouch.
- Test the setup at home first: Plug in the kit and verify your laptop charges before you leave. This catches a wrong tip or a loose connection early.
- Check your power bank’s charge level: The kit does not include a battery. Make sure your Sherpa is charged before you head out.
- Keep the 15-inch cord length in mind: The short cord means your laptop will need to sit close to the power bank. Plan your workspace accordingly.
Tips for using the kit with an open-box Sherpa 100PD
If you purchased an open-box Sherpa 100PD, the kit works the same way, but you should verify that the power bank’s output port is the 7.4mm size the kit requires. Open-box units may have minor cosmetic wear, but the port itself should be intact. Before your first trip, plug in the kit with your laptop’s tip and confirm the connection is snug. If the tip feels loose, try a different tip size from the kit—some laptops accept more than one size depending on the model year.
The supplied information does not confirm whether the Sherpa 100PD specifically includes a 7.4mm output port. Check the label on your unit or the product manual. If your Sherpa 100PD does not have that port, the kit will not work with it without an adapter, which is not included.
Key kit details at a glance
- Sherpa Laptop Charging Kit: Dimensions: 1.5 x 1.7 x 0.62 in The kit is small enough to toss in a laptop sleeve or pocket, so you can keep it with your computer.
- Sherpa Laptop Charging Kit: Compatible with: Asus Tip: 5.5, Dell Tip: 7.4, HP Tip: 7.4, IBM Tip: 5.5, 8, Lenovo Tip: 5.5, 8, Panasonic Tip: 5.5, Sony Tip: 6, Toshiba Tip: 5.5 This list is your quick reference for which tip to use. If your laptop brand is not listed, the kit may not fit.


