Two different jobs, not two sizes of the same thing
The Sherpa 100AC (previous model) and the Yeti 200X + Nomad 50 + Lights kit are often listed side by side, but the supplied records describe different tools. The Sherpa is a 2.0 lb travel power bank with a 94.7Wh pack and an integrated 100W AC outlet. The Yeti 200X kit centers on a 5 lb power station with a 187Wh peak capacity, paired with a folding solar panel and four lights.
That difference shapes the decision. If you need to keep a laptop and phone topped up on a flight or a short trip, the Sherpa’s airline-approved 95Wh class and compact dimensions matter. If you want a small solar generator for camping with lighting included, the Yeti kit’s higher capacity and bundled panel are the relevant facts. The records do not confirm weather ratings, vehicle compatibility, or safety-critical setup steps, so treat those as open questions rather than assumed features.
Capacity and physical size
- Sherpa 100AC (previous model): Pack capacity: 94.7Wh (14.8V, 6400mAh); weight 2.0 lbs; dimensions 7.5 x 1.0 x 5.68 in (19.0 x 2.54 x 14.4 cm). This is a carry-on-friendly power bank size, not a station you leave on a table. The record calls it airline-approved and travel-ready.

Sherpa 100AC (previous model) - Yeti 200X + Nomad 50 + Lights: Peak capacity: 187Wh (14.4V, up to 13Ah); weight 5 lbs (2.27 kg); dimensions 7.9 x 5.1 x 5.1 in (20 x 13 x 13 cm). The Yeti station roughly doubles the Sherpa’s capacity in a larger, heavier body. The kit also includes a Nomad 50 panel and lights, which changes the packing list.

Yeti 200X + Nomad 50 + Lights
Ports decide what you can actually run
The Sherpa 100AC’s headline port is its integrated 100W AC inverter (110V, up to 0.9A, 60Hz, modified sine wave). It also has two USB-C PD ports rated at 60W each, a USB-A port at up to 12W, and a 5W max Qi wireless charging surface. The record lists an OLED display that shows power in and out and lets you set roles for ports.
The Yeti 200X record lists a 120W AC inverter (200W surge), a 60W USB-C PD input/output port, an 18W USB-C output, a 12W USB-A output, a 120W 6mm output, and a 120W 12V car port. It also notes an MPPT charge controller and low battery protection. Neither record confirms pure sine wave output, so if a device is sensitive to modified sine wave, check the device’s own requirements before relying on either AC outlet.
Recharge paths and supplied charge times
The records give different recharge routes. The Sherpa lists wall, car, solar, and USB charging. The Yeti kit lists wall and solar charging, plus the included Nomad 50 panel.
- Sherpa 100AC wall charging: Fully recharges from the wall in about 3 hours using the Sherpa Power Supply accessory (not included); with a 45W wall charger, the record lists 3 hrs.
- Sherpa 100AC car and USB charging: About 3 hours from a 12V car adapter; 8–10 hours from a USB source using included cables.
- Sherpa 100AC solar charging: Nomad 20: 7.5–15 hrs; Nomad 50: 3–6 hrs; Boulder 50: 3–6 hrs. Charge time depends on the panel size.
- Yeti 200X wall charging: Wall charger (60W): 4.5 hours; wall charger (120W): 2 hours.
- Yeti 200X solar charging with included Nomad 50: Nomad 50: 4–8 hours. The record also lists Nomad 20 at 11–22 hours and Nomad 100 at 2–4 hours.
What the kits include changes the value equation
The Sherpa 100AC ships with four rugged cables: a 5" USB-C to USB-C cable, a 5" Lightning cable, a 5" Micro USB cable, and a 39" USB to USB-C cable. It does not include the wall power supply, so budget for that accessory if you plan to recharge from a wall outlet at full speed.
The Yeti 200X kit is broader: the Yeti 200X station, a Nomad 50 solar panel, four Light-a-Life Mini lights with colored and white shades, four carabiners, four Crush Light Chroma lanterns, and four USB Micro cables. The Nomad 50 has an integrated 8mm cable and can chain additional panels up to 150W. The Crush Light Chroma ships in Demo Mode; the record says to press and hold the on/off button for 10–15 seconds to exit Demo Mode. If you want a camp lighting setup and a small solar generator in one purchase, the kit covers more ground out of the box.
Runtime examples from the records
- Sherpa 100AC (previous model): Recharge estimates: POV camera (5Wh) up to 19 recharges; smartphone (12Wh) up to 7; tablet (30Wh) up to 3; laptop (50Wh) up to 1.5. These are the supplied estimates for the Sherpa’s 94.7Wh pack. They show it is sized for personal devices, not for running a fridge or a household appliance.
- Yeti 200X + Nomad 50 + Lights: Recharge estimates: smartphone (12Wh) 16; tablet (30Wh) 6; laptop (50Wh) 4; DSLR camera (18Wh) 11. Runtime examples include a portable fridge (25Wh) for 8 hours. The Yeti’s 187Wh capacity supports more recharges and includes a portable fridge example, which is a different use case from the Sherpa’s travel focus.
Practical trade-offs before you pick
The Sherpa 100AC is the lighter, more travel-oriented choice: 2.0 lbs, a 94.7Wh pack, two 60W USB-C PD ports, wireless charging, and a 100W AC outlet. Its limitations are the smaller capacity, the modified sine wave AC output, and the fact that the fast wall charger is sold separately. The record does not confirm a weather rating or airline acceptance beyond the “airline-approved” description.
The Yeti 200X kit is the better fit for a basecamp or weekend trip where you want lighting and solar charging included. It offers 187Wh, a 120W AC inverter with 200W surge, a 60W USB-C PD port, and the Nomad 50 panel with a 4–8 hour solar recharge estimate. It weighs 5 lbs for the station alone, and the kit adds a panel and lights. The record does not confirm a weather rating or a pure sine wave inverter.
For a small solar generator for camping, the Yeti kit’s included panel and lights reduce the number of separate purchases. For portable power on a plane or in a daypack, the Sherpa’s size and airline-approved framing are the deciding facts. Neither record supports claims about water resistance, drop ratings, or vehicle charging beyond the supplied 12V adapter note for the Sherpa.



