How to Set Up a Yeti 700 + Skylight Bundle for Outdoor Lighting

By Portable Power Stations, Solar Generators | Published: 2026-10-20

Category: How-to Guides

Learn how to set up the Yeti 700 + Skylight bundle for reliable outdoor lighting with step-by-step instructions and practical tips.

Quick Answer

To set up the Yeti 700 + Skylight bundle for outdoor lighting, place the power station on a dry, level surface, connect the Skylight string lights, and manage power with the Yeti 700's display.

Why This Bundle Works for Outdoor Lighting

The Yeti 700 + Skylight bundle combines a 677 watt hour power station with weather-resistant string lights, making it a practical choice for patios, campsites, and emergency lighting. The Yeti 700's rugged build handles outdoor conditions, while the Skylight lights provide ambient illumination without needing a wall outlet.

What to Consider Before Setup

Before you start, think about where you'll place the power station. It should be on a dry, stable surface away from foot traffic and potential splashes. Also, consider the length of the string lights and how far they need to reach from the power station. The Yeti 700's ports are on the front panel, so plan the cable route accordingly to avoid tripping hazards.

Step-by-Step Setup Guide

Choose a dry, level location: Place the Yeti 700 on a flat, dry surface, at least a few feet away from any water sources or sprinklers. Ensure the area around the power station is clear of debris. Double-check that the surface is stable and won't tip over if bumped.
Connect the Skylight string lights: Plug the Skylight string lights into one of the Yeti 700's AC or DC output ports. Use the port that matches the lights' connector type. Press the corresponding output button on the Yeti 700 to activate the port. Make sure the port is turned on—the display will show 'ON' for the active output.
Arrange the lights safely: Hang or drape the string lights along your desired area, ensuring the cable is not stretched tightly and is not routed across walkways. Use clips or hooks designed for outdoor lights to secure them. Avoid running the cable under rugs or through windows where it could be pinched or damaged.
Power on and test: Turn on the Skylight lights using their switch. Check the Yeti 700's display to see the current draw and estimated runtime. Adjust the light settings (if available) to reduce power consumption if needed. Note the runtime estimate—if it's lower than needed, consider dimming the lights or using a lower setting.
Monitor and recharge: Keep an eye on the Yeti 700's battery percentage during use. When it gets low, recharge it using a wall outlet, car charger, or compatible solar panel (sold separately). Plan to recharge before the battery drops below 20% to avoid complete discharge, which can reduce battery lifespan.

Product Facts

Yeti 700 + Skylight: The Yeti 700 features upgraded LiFePO4 battery technology for a long lifespan and is designed to handle mud, dirt, dust, and water. This means you can rely on it for repeated outdoor use and in less-than-clean environments without worrying about rapid battery degradation.
Yeti 700 + Skylight