8 kWh Haven Home Backup Setup Guide

By Portable Power Stations, Solar Generators | Published: 2026-10-27

Category: How-to Guides

Learn how to set up the 8 kWh Haven Home Backup system step by step, including placement, connection, and testing for reliable emergency power.

Quick Answer

To set up the 8 kWh Haven Home Backup system, position the Yeti Pro 4000 and Yeti Pro Tank Battery in a dry, ventilated area, connect them to the Haven 10 transfer switch, and then run the automatic self-test to verify backup coverage.

Why a Transfer Switch Matters

The Haven 10 transfer switch is the key component that connects the power station to up to 10 essential circuits in your home. It automatically switches power from the grid to battery backup during an outage, so you don't have to manually plug in appliances. Without it, you would need extension cords and manual intervention.

Placement and Safety First

Place the Yeti Pro 4000 and Yeti Pro Tank Battery on a level, non-flammable surface in a dry location. Keep at least 3 feet of clearance around the units for airflow. Avoid basements prone to flooding or areas near water pipes. The Haven 10 transfer switch should be installed near your main electrical panel by a licensed electrician.

Setup Steps

Unbox and Inspect: Carefully unbox the Yeti Pro 4000, Yeti Pro Tank Battery, and Haven 10 transfer switch. Verify all components are present and undamaged. Check that the battery charge level is above 20% before proceeding. If the battery is below 20%, charge it using the AC wall adapter before connecting to the transfer switch.
Position the Units: Place the Yeti Pro 4000 and Yeti Pro Tank Battery on a stable, non-flammable surface. Connect the two using the provided cable. Ensure the units are within 10 feet of the Haven 10 transfer switch and the main electrical panel. Do not place the units in a closet or near heat sources; they need ventilation to prevent overheating.
Connect the Transfer Switch: Have a licensed electrician install the Haven 10 transfer switch next to your main panel. The electrician will connect the switch to up to 10 circuits you choose. Once installed, plug the Yeti Pro 4000 into the transfer switch using the included cable. Only a licensed electrician should handle wiring to the main panel. Incorrect installation can cause shock or fire.
Configure and Test: Turn on the Yeti Pro 4000 and press the 'Test' button on the Haven 10 transfer switch. The system will simulate a power outage and automatically switch to battery power. Verify that all connected circuits (e.g., lights, fridge) are working. Press 'Test' again to restore grid power. Run the test monthly to ensure the system is ready. If a circuit doesn't power on, check the breaker and the connection to the transfer switch.

Product Facts

8 kWh Haven Home Backup: This system provides 7,988 watt hours of power and can backup 10 circuits in your home via the Haven 10 transfer switch. It means you can keep essential appliances like lights, refrigerator, and internet running during an outage without manual switching.
8 kWh Haven Home Backup