How to Secure Your Yeti or Tank PRO 4000 with a Locking Latch Kit

Quick answer

Install the Yeti/Tank PRO 4000 Locking Latch Kit to physically secure your power station to its cart or mounting plate, deterring theft and accidental disconnection.

Step-by-step installation

1. 1. Gather tools and check compatibility: You need the locking latch kit, a Phillips-head screwdriver, and a padlock (not included). Confirm your unit is a Tank PRO 4000 or that you have the Yeti PRO Cart or compatible mounting plate. The kit will not fit other models without modification. A standard 1/4-inch padlock shank works best; thicker shanks may not fit the latch.
2. 2. Position the latch bracket: Align the included bracket over the pre-drilled holes on your Yeti PRO Cart or mounting plate. The latch tab should face outward, away from the unit, so it can swing freely. Do not force the bracket—if holes don't align, you may have the bracket upside down. Check orientation by dry-fitting before inserting any screws.
3. 3. Secure the bracket with screws: Insert the two provided screws and tighten them evenly with a Phillips-head screwdriver. Over-tightening can strip the threads in the cart or plate. Stop when the bracket feels snug and does not wiggle. If screws feel loose after tightening, add a drop of thread-locker (not included) to prevent vibration loosening.
4. 4. Attach the latch and test movement: Slide the latch onto the bracket pin. It should rotate up and down freely. Close the latch over the unit's locking tab. If it binds, loosen the bracket screws slightly, reposition, and retighten. A sticky latch usually means the bracket is misaligned—don't lubricate it.
5. 5. Install padlock and verify security: Insert your padlock through the latch hole and lock it. Try to lift or slide the unit—it should not budge. Also check that you can still access the unit's power button and ports without interference. Leave the key in the padlock while testing to avoid locking yourself out.

What you need

• Yeti/Tank PRO 4000 Locking Latch Kit: Compatible with Tank PRO 4000, Yeti PRO Cart, and mounting plate (included w/ mounting plate). Dimensions: 2" x 3.12", weight: 0.3 lbs. The kit is designed specifically for these models and the Yeti PRO Cart, ensuring a snug fit that won't rattle loose during transport.